Error Code 201605: Fuser Error.
Trouble Shooting StepsCauseSolutionParts1The main board is faultyReplace the main board MBA795 <Video Link>Main board (004-3055-9-SP)
Image Problem:Too Deep (Gray Backgournd).
User Check 1. Check the environment. High or low temperature/humidity may cause the problem.2. Replace drum unit. <Video Link> 3. Replace toner unit. <Video Link>
Error Code 200039: Toner Cartridge Error. Please Rplace Toner Cartridge from Original Manufacturer.
User Check 1. Please ensure you had replaced the toner cartridge from original manufacturer. <Video Link>
Error Code 200039: Toner Cartridge Error. Please Rplace Toner Cartridge from Original Manufacturer.
User Check 1. Please ensure you had replaced the toner cartridge from original manufacturer. <Video Link>
Error Code 200330: Paper Jam.
User Check 1. Open rear cover to pull down the paper path & green arm of the both side. 2. Remove the jammed paper and ensure this position without any…
Error Code 200328: Paper Jam.
User Check 1. Open front cover and remove the drum unit to confirm the jammed paper. 2. Check if there are the jammed paper, rotate the green release wheel to…
Error Code 200327: Paper Jam.
User Check 1. Open front cover and remove the drum unit to confirm the jammed paper. 2. Check if there are the jammed paper, rotate the green release wheel to…
Image Problem: Black Vertical Lines on a Light Background.
User Check 1. Clean the corona wire or the power grid of the drum unit.Slide the corona wire to the end and then back to the original place. Repeat this…
Image Problem: White Vertical Line.
User Check 1. Clean the corona wire or the power grid of the drum unit.Slide the corona wire to the end and then back to the original place. Repeat this…
- Go to the previous page
- 1
- …
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- …
- 93
- Go to the next page
