Image Problem: Poor Positioning
User Check 1. Check if proper paper type has been selected in printer driver.
User Check 1. Check if proper paper type has been selected in printer driver.
User Check 1. Clean corona wire of the drum unit.Slide the corona wire to the end and then back to the original place. repeat this for at least 3 times.…
User Check 1. Clean corona wire of the drum unit.Slide the corona wire to the end and then back to the original place. Repeat this for at least 3 times.…
User Check 1. Clean corona wire of the drum unit.Slide the corona wire to the end and then back to the original place. repeat this for at least 3 times.…
User Check 1. Clean corona wire of the drum unit.Slide the corona wire to the end and then back to the original place. repeat this for at least 3 times.…
User Check 1. Check the operational environment. High or low temperature could cause this problem.2. Check if the paper is dampened.3. Or replace the toner cartridge. 4. Or else replace…
User Check 1. Open the side door.2. Open the fuser out guide part to check the paper jam position, then close it. 3. Press the green plastic of fuser both…
User Check 1. Replace the develop unit. 2. Clean corona wire of the drum unit. 3. Replace the drum unit.
User Check 1. Open the side door.2. Removal the jam paper form the duplex path upper side.3. Close the side door to try again. <Video Link>
User Check 1. Open the duplex path cover.2. Open the side door.3. Removal the jam paper form the duplex path down side.4. Close the side door and duplex path cover…