Yes. Please follow these steps to set a real-time clock for the device： 1. Open your browser and type Avision’s web site (http://www.avision.com) at the URL address. On the Product…
The color of the Power button light indicates the selected resolution: Green = 300 dpi, Orange = 600 dpi , Red = 1200 dpi. Press the Power button to change…
If the blue LED light is lit, this indicates the scanned images will be stored in PDF file format. (After turn on the scanner, press the Power button for three…
Check the following： ▘Is the scanner’s built-in disk full? Connect the scanner to a computer to move or delete files. The scanner recognizes the built-in disk as “full” and the…
The scanner may be in the Wi-Fi mode, it must be in the OFF position before scanning. Before scanning photos or documents, the microUSB cable must be disconnected from the…
Make sure the scanner Wi-Fi mode is in the On position. If Wi-Fi Access Point is still in countdown mode, wait until countdown reaches “00” is displayed on the LCD…
Yes. When Wi-Fi mode is on, the scanner does not time-out and automatically turnoff like it does normally. Therefore, it is recommended to turn off the Wi-Fi mode when images…
To resume your normal Wi-Fi connection, be sure to re-connect your computer, tablet or phone to your usual local Wi-Fi network when you are finished with your scanner connection.
It is probably the proxy settings has been enabled in your device’s browser or the URL address of your default page contains “https”. In these cases, please enter http://www.google.com or…
If using a microSD card, do not remove the microSD card while you are connected via Wi-Fi. If you have done so, you must restart the scanner to reconnect with…
