Why do all the images I scanned have the same date when saved on the memory card? Is it possible to show real time for these images?

Yes. Please follow these steps to set a real-time clock for the device：

1. Open your browser and type Avision’s web site (http://www.avision.com) at the URL address. On the Product or Support page, select this mobile scanner and then download a time.txt file for the device.

2. Make sure your scanner is inserted with a SD card and a battery full of power.

3. Turn on your scanner and connect it to your computer with a USB cable. Your computer should recognize the scanner as a Removable Disk.

4. Copy and paste the time.txt file to the root directory of the Removable Disk Drive.

5. Open the text file. The text file contains a string in YYYY/MM/DD/HH/MM format which indicates year(4- digit)/month(2-digit)/date(2-digit)/hour(2-digit)/minute(2- digit), for example, 2013/06/15/07/30.

6. Change the date and time to correct values and then save the file.

7. Turn off the scanner and then turn it on. Now your have completed setting the real-time clock for the device. Scan a document and save the image to the memory card. Connect the scanner to your computer, you will find the scanned images are displayed with correct date and time.

  • Note：
  • Charge your battery when its power is running low.
  • If the battery has been replaced or the battery has no power at all, you will need to recharge the battery and repeat the above steps to set a real-time clock again.