Error Code 200032: Toner Cartridge Lifetime Near End
Trouble Shooting StepCauseSolutionParts1Toner cartridge unit usage remain lower than 10%Replace toner cartridgeToner 6K (015-0296-21)10K (015-0297-21)
Error Code 200031: Toner End of Life. Please Replace Toner Cartridge.
Trouble Shooting StepCauseSolutionParts1Toner cartridge life time end.Replace toner cartridgeToner 6K (015-0296-21)10K (015-0297-21)
Error Code 200030:No Toner Cartridge.
Trouble Shooting StepCauseSolutionParts1Toner cartridge defective.Replace toner cartridgeToner 6K (015-0296-21)10K (015-0297-21)2Main board defective.Replace main board MBA890.Main board:AM7630i (004-3479A-9-SP)AM7640i (004-3479B-9-SP)AM5630i (004-3479C-9-SP)AM5640i (004-3479D-9-SP)
Image Problem: Image Distortion.
Trouble Shooting StepCauseSolutionParts1Feeding in roller defects.Replace the feeding in roller.Feeding in roller (002-A295-0-SP)2Feeding out roller defects.Replace the feeding out roller.feeding out roller (002-A296-0-SP)
Error Code 201623: Fuser Error.
Trouble Shooting StepsCauseSolutionParts1Thermistor faultReplace Fuser220V Fuser (002-7476-0-SP)110V Fuser (002-7536-0-SP)2The main board is faultyReplace the main board MBA795 <Video Link>Main board (004-3055-9-SP)
Error Code 201607: Fuser Error.
Trouble Shooting StepCauseSolutionParts1Operating temperature too low.Change the operating temperature and restart the printer.2Used voltage too lowCheck power and avoid using overloaded electrical appliances on the same line.3Thermistor faultReplace Fuser.220V Fuser…
Error Code 302651: Network Initial Fail.
Trouble Shooting StepsCauseSolutionParts1The motherboard is faultyReplace the main board MBA795 <Video Link>Main board (004-3055-9-SP)
Image Problem: Dirty Background.
Trouble Shooting StepsCauseSolutionParts1There is dirt in the paper pathWipe off the dirt. Please refer to the spacing of the various rollers in the image.2There is dirt on the heating roller…
Error Code 200046:The Cartridge has been Replaced. Please Restart MFP.
Trouble Shooting StepCauseSolution1When the machine is replaced with a new drum, if the drum's chip information is in a newer status, the machine needs to be restarted to write the…
Error Code 201616: Fuser Error.
Trouble Shooting StepsCauseSolutionParts1Thermistor faultReplace Fuser.220V Fuser (002-7476-0-SP)110V Fuser (002-7536-0-SP)2The AC supply supply voltage is abnormalPlease check the power supply <Video Link>220V Power supply (005-3134-9-SP) 3The main board is faultyReplace the…
- Go to the previous page
- 1
- …
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- …
- 58
- Go to the next page
